Burleson Plumbing Company handles the full range of residential and commercial plumbing work in Burleson and across Johnson County. Whether you need a drain cleared, a water heater replaced, a slab leak tracked down, or a burst pipe repaired fast, we take the call and get the job scoped before anything is scheduled. Homeowners, landlords, property managers, and business owners all reach us the same way.
Call (682) 899-2956 for a quote.
Plumbing a home right takes the right tools and a careful hand, and the same is true for a commercial space. We work across all property types in the area: single-family homes, rental houses, apartment buildings, office buildings, and mixed-use properties. If you manage multiple units or a commercial building, we can scope and price the work the same way we would for any other job.
We take calls every day from 5:00 AM to 10:30 PM. When you call, you get a price before anything is put on the schedule. The scope gets confirmed, the rate gets settled, and you decide how to move forward. Clear communication from the first call to the final test is how every job runs. We'll handle the pipes so you don't have to.
Doing plumbing work right matters, and we'll help you get it right, whether the job is a single dripping faucet or a whole-house repipe. Below is the core plumbing work we handle across Burleson and the surrounding area.
Slow drains and backed-up lines are among the most common calls we get. A partial clog in a kitchen drain or a main line blockage can back up an entire property if it goes unaddressed. We clear clogs in individual fixtures, branch lines, and main drains. For stubborn blockages, hydro jetting uses high-pressure water to cut through grease, scale, and debris that a standard snake leaves behind. The cause gets found before anything is replaced.
Most plumbing problems give some warning first, and a slow leak is one of them. A water stain on a ceiling, a spike in the water bill, or soft flooring near a fixture can all point to a pipe leak somewhere in the system. We use pressure testing and electronic leak detection to locate the source without unnecessary cutting or digging. Slab leak detection and repair is part of this work, and it matters in a region where slab-on-grade construction is the standard. Reach out and we'll start at the source of the leak.
No hot water is one of the more disruptive plumbing problems a household or business faces. We service both tank and tankless water heaters, covering repairs, full replacements, and new installations. A water heater that takes too long to recover, produces discolored water, or has visible corrosion around the connections is telling you something. We diagnose the problem and give you a clear picture of whether a repair or a replacement makes more sense before any work begins.
A running toilet, a dripping faucet, or a fixture that wobbles at the base are all fixable jobs that tend to get put off longer than they should. We handle toilet repair and replacement, faucet repair and installation, and full fixture swaps for bathrooms and kitchens. Garbage disposal installation and repair falls under this work as well. If a disposal is jamming frequently, leaking at the base, or simply worn out, we replace it with a unit that fits the sink and the household's use.
Low water pressure affects everything from a shower to a commercial dishwasher. The cause could be a failing pressure regulator, a partially closed shutoff valve, a clogged supply line, or a leak elsewhere in the system. We diagnose the source, repair or replace the valve or regulator, and confirm the pressure is back to where it should be. Main water shutoff repair and shutoff valve replacement are part of this work.
A slow-draining home or a sewage odor near floor drains often points to the main sewer line. We handle sewer line cleaning, repair, and replacement, including trenchless repair methods where the line and the site allow for it. Sewer backup repair and main line clearing are common jobs in this area, and we approach each one by identifying what the line is doing before recommending a fix.
Aging pipe systems eventually reach a point where repairs are no longer the practical answer. Galvanized steel and older polybutylene lines are common in the housing stock across Johnson County, and both have a known service life. Whole-home repiping replaces the water supply lines throughout the house in a single planned job. We also handle outdoor plumbing repair and water supply line replacement for sections of the system that have corroded or failed.
We handle gas line repair and installation for the supply lines that run to appliances throughout a home or commercial building. If a gas line is damaged, undersized for the load, or needs to be extended for a new appliance location, that is work we scope and handle on the plumbing side. We speak to the line itself, not to the appliances it feeds.
A burst pipe or a major water leak does not wait for a convenient time. We take emergency plumbing calls every day from 5:00 AM to 10:30 PM. Burst pipe repair, water shutoff emergencies, and major active leaks all qualify as urgent work. When you call, you get clear communication from the first call to the final test, including what the job involves and what the rate will be before anything is dispatched. Schedule it. We fix it. You're flowing.
Johnson County sits on clay-heavy soils that shift seasonally, and that movement puts stress on underground lines and slab foundations alike. The housing stock ranges from newer subdivisions on the edges of Burleson to older neighborhoods with mature trees and original pipe systems. Hard or soft, the water in this area affects how pipes and fixtures age. The water hardness across the DFW supply area is a real factor in how long water heaters, fixtures, and supply lines hold up. We handle the plumbing work this area actually generates, and the jobs below come up regularly for properties in and around Burleson.
When you call, you reach someone who can scope the job on the phone and give you a price before anything is scheduled. The work is carried out locally, and the answer you get reflects what is actually happening in this area.
Burleson and the surrounding parts of Johnson County can see heavy rain during spring storm season, and low-lying properties or those with any below-grade space can take on water quickly. A sump pump installation puts a drainage solution in place before the next storm arrives. We size the pump to the space, run the discharge line to a proper outlet, and test the float and switch before the job is called done.
Mature trees and clay soils are a well-known combination for sewer line problems in North Texas neighborhoods. Tree roots follow moisture, and the joints in older clay or cast-iron sewer lines give them an entry point. Once inside, roots grow fast and cause slow drains, backups, and eventually line failure. We clear root intrusion from the line, use camera inspection to assess the extent of the damage, and recommend trenchless repair or targeted replacement where the line warrants it.
Hard water is common throughout Johnson County and the broader DFW-area water supply. Scale buildup from hard water shortens the life of water heaters, clogs fixture aerators, and leaves deposits on everything the water touches. A water softener installation addresses the problem at the point of entry, protecting the whole system. We size the unit to the household's water use, handle the supply line connections, and confirm the system is working before we leave.
Choosing the right plumbing fix is easier than it sounds, and pricing works the same way. You call, we scope the job, and you get a rate on the phone before anything is scheduled. That covers drain cleaning, water heater replacement, repiping, slab leak repair, and everything in between. The repair is pressure-tested before the job is called done, so you know the fix held before we wrap up. Call and we'll get the water running right.
We serve Burleson and the communities around it throughout Johnson County and southern Tarrant County. That includes Crowley, Joshua, Cleburne, Mansfield, Kennedale, and Alvarado. Homes, rental properties, apartment complexes, and commercial buildings across this area are all work we take on. If you are looking for a plumbing contractor near you in this part of Texas, call and we will confirm whether your address falls in our service area.
A sump pump installation starts with identifying where water is collecting and determining the lowest point that needs protection. The work covers pit installation, pump sizing for the volume of water the site sees during heavy rain, and discharge line routing to move water away from the structure. North Texas clay soil does not drain quickly, and properties that take on water after spring storms benefit from a properly sized system in place before the next one arrives.
Call (682) 899-2956 to get the job scoped and priced.
Tree roots follow moisture, and the joints in older clay or cast iron sewer lines give them an entry point. We clear root intrusion using hydro jetting or mechanical cutting depending on what the line shows, and we run a camera inspection to confirm the extent of the damage before making a recommendation. If the line has been compromised enough that clearing it is a short-term fix, we explain the repair or replacement options before any work starts. This is a common call in the older and established neighborhoods around Burleson.
Hard water is common throughout Johnson County and the broader DFW water supply area, and the effects show up in scale buildup inside pipes, shortened water heater service life, and clogged fixture aerators. A water softener installation addresses the problem at the point of entry rather than treating individual symptoms. We size the unit to the household's water use, handle the supply line connections, and confirm the system is working before the job is finished. If scale has already built up in a water heater or is restricting flow at a fixture, that work can be handled at the same time.
Low pressure throughout the home usually points to a failing pressure regulator, a partially closed main shutoff valve, mineral buildup narrowing a supply line, or a leak somewhere in the system that is bleeding off pressure. We diagnose the source before recommending a fix, because the repair depends on what is actually causing the drop. A pressure regulator replacement is a different job than clearing a scaled supply line or finding a hidden leak. We confirm the pressure is back to where it should be before the job is called done.
Common signs include no hot water at all, water that heats slowly or runs lukewarm, discolored or rusty water from the hot faucet, a unit that makes rumbling or popping sounds, or visible corrosion around the connections and base. A water heater that runs out of hot water faster than it used to may have a failing heating element or sediment buildup reducing the effective tank capacity. We diagnose the problem and give you a clear picture of whether a repair or a replacement makes more sense before any work begins. Hard water in Johnson County accelerates scale buildup, which shortens water heater service life.
A section repair addresses a specific failed or leaking length of pipe while leaving the rest of the system in place. A full repipe replaces all of the water supply lines throughout the home in a single planned job. The right answer depends on the age and condition of the pipe material throughout the house. Galvanized steel lines corrode from the inside out, and by the time one section fails, the rest of the system is often in similar condition. We assess the full picture and explain which approach makes more sense for your specific situation before any work starts.
Homes built through the 1970s and into the 1980s in this area often have galvanized steel supply lines, which corrode from the inside out over time. The corrosion narrows the pipe, reducing pressure, and eventually the pipe wall fails. Cast iron drain lines are also common in older construction and corrode and crack with age. The clay-heavy soil in Johnson County shifts with moisture changes, which puts additional stress on underground lines and slab foundations. These factors combine to make leak detection, pipe repair, and repiping common work in the older neighborhoods around Burleson.
We pressure-test repairs before calling the job done. For water line repairs, that means pressurizing the repaired section and confirming there is no drop that would indicate a remaining leak. For drain and sewer line work, we confirm flow is restored and, where a camera was used to diagnose the problem, we can verify the line is clear. The repair is not considered finished until the test confirms it held.
When we arrive, we confirm what was described on the call and take a closer look at the problem. We check the affected fixture, line, or system, confirm our diagnosis, and let you know if anything changes the scope or the price before work begins. We protect your floors and finishes while we work, and we clean up the area before leaving. The repair is pressure-tested before the job is called done.
For most jobs, having someone present who can show us the problem and confirm the scope is helpful. For rental properties and commercial buildings, a property manager or designated contact can handle access without the owner being present. If you cannot be home, let us know when you call and we will discuss what access is needed and how to arrange it. We confirm the details before the visit so nothing is left to chance on arrival.
Keeping children and pets out of the immediate work area during a plumbing visit is the safest approach for everyone. Let us know when you call if there are animals in the home so we can account for door access when we arrive. For jobs that involve the main water shutoff or work in multiple rooms, it helps to have a plan for where kids and pets will be during the visit. We will let you know when the work area is clear and the job is finished.
Burleson Plumbing Company handles repairs, installations, and emergency calls for residential and commercial properties across Burleson and Johnson County. We protect your floors and finishes while we work, and we leave the space clean when the job is done. We are available every day from 5:00 AM to 10:30 PM.
Call (682) 899-2956 to get a quote. Right diagnosis. Right repair. Right the first time.
We handle the full range of plumbing work for homes and businesses across Burleson and Johnson County, from a single clogged drain to a whole-home repipe. Every job starts with a phone call where we scope the work and give you a price before anything is scheduled. The table below covers what each service includes, who it fits, and what is worth knowing before you call.
Call (682) 899-2956 to get a quote on any of these jobs.
| Type of Job | What It Covers | Typical Situations | Good to Know |
|---|---|---|---|
| Emergency Plumbing |
| Any situation where water is actively damaging the property or the supply cannot be controlled | We take emergency calls every day from 5:00 AM to 10:30 PM. The scope and price are confirmed on the call before anything is dispatched. |
| Water Softener Installation |
| Johnson County homes dealing with scale buildup, shortened appliance life, or hard-water deposits on fixtures | Treating the water at the point of entry protects the whole system rather than addressing scale buildup one fixture or appliance at a time. |
| Sewer & Main Line Service |
| Properties with slow drains throughout the home or sewage odors near floor drains | Clay-heavy soil in Johnson County shifts seasonally, putting stress on underground sewer lines and accelerating joint separation in older pipe. |
| Whole-Home Repiping |
| Older homes with recurring leaks, low pressure, or discolored water from corroding pipe | Galvanized steel corrodes from the inside out, so by the time one section fails, the rest of the system is often in similar condition. |
| Faucet & Fixture Installation |
| Homeowners upgrading fixtures or dealing with persistent drips and leaks | Mineral deposits from hard water wear out cartridges and aerators faster here than in softer-water areas, making fixture repairs a common call. |
| Water Pressure & Shutoff Valve Repair |
| Homes with low pressure at multiple fixtures or a shutoff valve that will not close fully | Low pressure throughout the house usually points to the regulator or main shutoff, while pressure loss at one fixture is more often a supply line or aerator issue. |
| Sump Pump Installation |
| Low-lying properties or those with below-grade space that takes on water during heavy rain | North Texas clay soil does not drain quickly after heavy spring storms, so a properly sized pump in place before the season starts is worth the call. |
| Slab Leak Detection & Repair |
| Slab-on-grade homes with unexplained water loss, warm floor spots, or foundation moisture | Slab-on-grade construction is the standard in this area, making under-slab leak detection a regular part of the work we do here. |
| Leak Detection & Repair |
| Properties with unexplained water bill spikes, stains, or soft flooring | Finding the source before cutting or digging protects your floors and finishes and keeps the repair focused on what actually failed. |
| Drain Cleaning & Clog Removal |
| Homes or businesses with slow, gurgling, or backed-up drains | Hydro jetting clears buildup that a standard snake pushes past rather than removes, making it the better call for recurring clogs. |
| Toilet Repair & Installation |
| Homes with a running, rocking, or leaking toilet that needs a lasting fix | A running toilet can waste a significant amount of water before the problem is obvious on a bill, so catching it early keeps costs down. |
| Water Heater Repair & ReplacementMost Popular |
| Households or businesses with no hot water, slow recovery, or a corroding unit | Hard water in Johnson County accelerates scale buildup inside tank heaters, shortening service life and reducing recovery speed. |
What is the difference between tank and tankless water heaters?
A tank water heater stores a set volume of hot water and reheats it as it cools. A tankless unit heats water on demand as it flows through the unit, so there is no stored supply to run out of. The right choice depends on the household's hot water demand, the available gas or electrical supply, and the space where the unit will be installed. Tank units are simpler to replace and generally cost less upfront. Tankless units take up less space and do not hold standing water, which reduces standby heat loss. We walk through both options when you call so you can decide what fits your situation before anything is scheduled.
How do tree roots damage a sewer line, and what does the repair involve?
Tree roots follow moisture, and the joints in older clay or cast iron sewer lines give them a way in. Once inside, roots grow and expand, restricting flow, causing backups, and eventually splitting the pipe wall. The damage is not always visible from above ground, which is why we run a camera inspection to assess how far the intrusion has spread before recommending a fix. Clearing the roots is the first step. Whether the line then needs trenchless repair, a targeted section replacement, or a full replacement depends on what the camera shows. We explain the options before any work starts.
What does hydro jetting clear that snaking cannot?
A drain snake breaks up or pulls out a blockage, but it does not clean the pipe wall. Grease, soap scum, and mineral scale build up on the inside of drain lines over time and narrow the opening even after a snake clears the immediate clog. Hydro jetting uses high-pressure water to cut through that buildup and flush it out of the line, leaving the pipe wall clean rather than just passable. For recurring clogs in a kitchen drain or a main line that keeps slowing down, hydro jetting addresses the buildup rather than just the symptom.
Cause Found Before Anything Is Replaced
We diagnose the source of the problem before recommending a repair or a replacement. That means you get a fix that addresses what actually failed, not the most convenient guess.
How is a slab leak located without tearing up the floor?
We use pressure testing and electronic leak detection to find the source of an under-slab leak before any concrete is cut. Pressure testing isolates the affected line and confirms there is a leak and roughly where it is. Electronic detection equipment picks up the sound or moisture signature of water escaping the pipe and helps us pinpoint the location. That process keeps the access point as small as possible, which matters when the alternative is cutting a wide area of slab to search for the problem. Once we know exactly where the leak is, we open only what is needed to make the repair.
When should I call a plumber instead of trying to fix it myself?
A slow drain you can clear with a plunger or a running toilet where a flapper swap fixes the problem are reasonable DIY jobs if you are comfortable with the work. The line shifts when the problem involves the main line, a supply line behind a wall, anything under a slab, a water heater, or a gas line. Those jobs involve systems where a mistake can cause water damage, a gas leak, or a code issue that complicates a future sale or insurance claim. If the fix requires shutting off the main supply, cutting into a wall or slab, or touching a gas connection, a call to us first costs nothing and can save a lot.
How do I know if the clog is in the fixture or the main line?
If one fixture drains slowly or not at all and everything else in the house is fine, the clog is almost certainly in the branch line serving that fixture. If multiple fixtures are backing up at the same time, especially on the same floor or throughout the house, the problem is more likely in the main line. A toilet that gurgles when you run a sink nearby is another sign the main line is involved. We confirm which it is before recommending a fix, because clearing a branch line and clearing a main line are different jobs with different approaches.
Clean and Respectful Workmanship
We protect your floors and finishes while we work and clean up the area before leaving. The repair is pressure-tested before the job is called done.
What causes a faucet or fixture to drip or leak after it has been in place for years?
Most drips come from a worn cartridge, a deteriorated O-ring, or a seat washer that has been compressed and worn down over time. Hard water accelerates that wear because mineral deposits build up on the moving parts inside the valve and on the seat the washer presses against. A faucet that drips steadily at the spout usually has a worn cartridge or washer. One that leaks at the base or around the handle is more often a failed O-ring or packing. We identify which component has failed before recommending a repair or a replacement, because not every dripping faucet needs a full fixture swap.
How long does a whole-home repipe typically take?
The timeline depends on the size of the house, the number of fixtures, and the pipe material being replaced. A single-story home with a straightforward layout can often be completed in one to two days. A larger or multi-story home with more complex routing takes longer. We give you a realistic timeframe when we scope the job on the call, not a range wide enough to be meaningless. The water supply is off during the work, so knowing the schedule in advance lets you plan around it. We pressure-test the new lines before the job is called done.
Straightforward Scheduling
You call, we scope the job, and you get a price before anything is put on the schedule. Every call gets treated like it matters, because it does.
What happens if a sump pump fails during a storm?
A failed sump pump during heavy rain means water that would normally be discharged starts collecting in the pit and can overflow into the space around it. The most common failure causes are a burned-out motor, a stuck or failed float switch, or a clogged discharge line. If the pump is running but not moving water, the discharge line is the first place to check. If the motor is not running at all, the pump likely needs replacement. We can assess the unit, confirm what failed, and replace it if needed. If you are in a low-lying area or your property has taken on water before, having the pump inspected before storm season is worth the call.
What are the signs that a main shutoff valve needs to be repaired or replaced?
A main shutoff valve that will not close fully is a problem you may not notice until you need it. Signs include a valve handle that turns but does not stop the flow, visible corrosion or mineral buildup around the valve body, or a slow drip from the packing nut when the valve is in the open position. Gate valves, which are common in older homes, are more prone to this than ball valves. If the valve has not been operated in years, turning it can sometimes cause it to fail in place. We can replace an aging or failing shutoff valve with a ball valve that closes cleanly and holds reliably.
How are emergency plumbing calls handled after hours?
We take calls every day from 5:00 AM to 10:30 PM. When you call with an emergency, we scope the problem on the phone and give you a clear picture of what the job involves and what the rate will be before anything is dispatched. If you have a burst pipe or an active leak that cannot wait, the first step while you wait is to locate and close the main shutoff valve to stop the water supply to the house. We can walk you through that on the call if you need help finding it. The scope and the price are settled before we start, so there are no decisions to make under pressure once the work begins.
Call (682) 899-2956 and we will scope the job, give you a price, and get the work on the schedule.
(682) 899-2956